Igwe ihe mgbochi kwụ ọtọ CQ6280
Atụmatụ
Ụkwụ zuru oke ma ọ bụ nkewapụrụ maka nhọrọ
11KW (15HP) isi moto maka nhọrọ
Lathe a nwere uru dị n'ọsọ ntụgharị dị elu, nnukwu oghere spindle, mkpọtụ dị ala, ọmarịcha ọdịdị, yana ọrụ zuru oke.Ọ nwere ezigbo isi ike, ịdị elu ntụgharị ntụgharị dị elu, oghere spindle buru ibu, ma dabara adaba maka ịkpụ siri ike.nwere ike na-atụgharị metric na Imperial eri ozugbo ， Ngwá ọrụ igwe a nwekwara ọtụtụ ngwa, mgbanwe na arụmọrụ dị mma, njikwa sistemu sistemu arụ ọrụ, nchekwa na ntụkwasị obi, mmegharị ngwa ngwa nke igbe slide na efere etiti etiti, yana ọdụ ọdụ. ibu ngwaọrụ na-eme ngagharị na-azọpụta ọrụ nke ukwuu.Ngwá ọrụ igwe a nwere ihe nlele taper, nke nwere ike ịtụgharị cones ngwa ngwa.Usoro nkwụsị nkukota nwere ike ịchịkwa ọtụtụ atụmatụ dị ka ntụgharị ogologo.
| Ngwa Ọkọlọtọ: | Ngwa ngwa nhọrọ |
| 3 agba agba Aka aka na etiti egbe mmanụ | 4 agba agba abd nkwụnye Zuru ike kwụ ọtọ Soro izu ike Efere ịnya ụgbọ ala Efere ihu Ìhè na-arụ ọrụ Sistemụ breeki ụkwụ Sistemụ oyi |
Nkọwapụta
| Ụdị ngwá ọrụ igwe | CQ6280 |
| IKE | |
| Swing Over slide | Φ800mm |
| Swing Over Cross slide | Φ570mm |
| Swing na dayameta Gap | Φ1035mm |
| Ogologo nke ọdịiche | 250mm |
| Anya n'etiti Centers | 1500mm / 2000mm / 3000mm |
| Ogologo akwa | 400mm |
| Oke.Akụkụ nke Ngwá Ọrụ | 25mm × 25mm |
| Oke.Njem nke Cross slide | 420mm |
| Oke.Njem ezumike nke Compound | 230mm |
| OKWU isi | |
| Spindle Bore | Φ105mm |
| Spindle imi | D1-8 |
| Taper nke Spindle Bore | Φ113mm (1:20)/MT5 |
| Nọmba Ọsọ Spindle | 16 |
| Oke nke Spindle Speed | 25 ~ 1600 rpm |
| Nri na Egwu | |
| Ntugharị isi | Φ40mm × 2T.PI ma ọ bụ Φ40mm × 12mm |
| Ogologo eriri inch | 7/16 ~ 80T.PI (ụdị 54) |
| Ogologo eriri metric | 0.45 ~ 120mm (ụdị 54) |
| Ogologo Okirikiri Diametrical | 7/8 ~ 160DP (ụdị 42) |
| Oke Modul Pitches Oke | 0.25 ~ 60MP (ụdị 46) |
| Ogologo nri ogologo dị na Metric Lead Screw | 0.044 ~ 1.48mm / rev (ụdị 25) |
| Ogologo nri ogologo dị na inch Lead Screw | 0.00165"～0.05497"/mkpu (ụdị 25) |
| Ofefe nri dị na Metric Lead Screw | 0.022 ~ 0.74mm / rev (ụdị 25) |
| Ofefe nri dị na inch Lead Screw | 0.00083"～0.02774"/mkpu (ụdị 25) |
| Ọdụdọ | |
| Njem Quill | 235mm |
| Dayameta quill | Φ90mm |
| Kwụsị taper | MT5 |
| MOTO | |
| Isi moto ike | 7.5kW (10HP) |
| Ike mgbapụta oyi | 0.09kW (1/8HP) |
| Akụkụ na ibu | |
| N'ozuzu akụkụ (L×W×H) | 321/371/471cm × 123cm × 167cm |
| Nha mbukota (L×W×H) | 324/374/474cm × 114cm × 191cm |
| Nha ịbụ | 3220/3505/3870kg |
| Mkpokọta nha | 3705/4005/4480kg |
