Igwe eji eji eriri igwe akwụkwọ ntuziaka CD6240C

Igwe eji akwa igwe CD6240C egosipụtara n'aka

Nkọwa dị mkpirikpi:

Lathe a nwere uru dị n'ọsọ ntụgharị dị elu, nnukwu oghere spindle, mkpọtụ dị ala, ọmarịcha ọdịdị, yana ọrụ zuru oke.Ọ nwere ezigbo isi ike, ịdị elu ntụgharị ntụgharị dị elu, oghere spindle buru ibu, ma dabara adaba maka ịkpụ siri ike.Ngwá ọrụ igwe a nwekwara ọtụtụ ngwa dị iche iche, ọrụ na-agbanwe ma dị mma, njikwa sistemu nke sistemu arụ ọrụ, nchekwa na ntụkwasị obi, mmegharị ngwa ngwa nke igbe slide na efere etiti, yana ngwaọrụ ọdụ ọdụ na-eme ngagharị na-azọpụta ọrụ. .Ngwá ọrụ igwe a nwere ihe nlele taper, nke nwere ike ịtụgharị cones ngwa ngwa.Usoro nkwụsị nkukota nwere ike ịchịkwa ọtụtụ atụmatụ dị ka ntụgharị ogologo.

Ọ dabara maka ụdị ọrụ ntụgharị ọ bụla, dị ka ntụgharị ihu cylindrical dị n'ime na nke mpụga, ebe conical na ebe ndị ọzọ na-atụgharị na ihu njedebe.Ọ nwekwara ike hazie eriri dị iche iche a na-ejikarị eme ihe, dị ka metric, inch, modul, threadi pitch dayameta, yana mkpọpu ihe, reaming na ịme ọpịpị.Ịmepụta eriri waya na ọrụ ndị ọzọ.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Atụmatụ

Oghere dị n'ụdị spindle karịrị 80mm
Isi spindle dị ike kwụ ọtọ, ma kwado ya na isi ihe abụọ nwere akara akara Harbin.
Ọdịdị elu igwe na-egosipụta nnukwu mbara ala, na-eme ka igwe ahụ dịkwuo mma

Ụzọ akwa akwa nwere oghere, bụ nke siri ike ugboro ugboro (HB450 gbakwunyere).
Ngwa niile gbasiri ike wee gbatuo site na igwe igwe igwe Reishauer.
Akpọchiri screw Leads na Fiidi, ha abụọ nwere nchekwa oke ibu.
Ihe nkwụsị nri na-akpaghị aka.
Nhazi agbanwe kpamkpam dịka iwu siri dị:
Sistemụ metric ma ọ bụ inch;Wheel aka nri ma ọ bụ aka ekpe;Halogen oriọna;Mgbanwe ngwa ngwa;Ngosipụta ngwaọrụ;DRP;Ngwakọta T-oghere;Chuck nche;Ihe mkpuchi ndu;moto traverse ngwa ngwa;breeki eletrik;Usoro mmanye mmanye mmanye.

Nkọwapụta

Nlereanya		CD6240C
IKE	Oke.na-efegharị n'elu akwa mm	400
	Oke.swing n'elu obe mmịfe mm	225
	Oke.swing na oghere mm	530
	Ogologo etiti	1000,1500, 2000mm
	Njem mmịfe gafere mm	330mm
SPINDLE	oghere Spindle	80mm
	Spindle imi	ISO-C8 ma ọ bụ ISO-D8
	Spindle taper	Metric 85mm
	Ọsọ spindle	24-1600rpm (nzọụkwụ 15)
Nri nri	Oke eri metric (ụdị)	0.5-28mm (66 ụdị)
	Ogologo eriri inch (ụdị)	1-56tpi (ụdị 66)
	Oke eriri modul (ụdị)	0.5-3.5mm (ụdị 33)
	Ogologo eriri dayameta (ụdị)	8-56 DP (ụdị 33)
	Ogologo nri ogologo (ụdị)	0.072-4.038mm/mgbanwe (0.0027-0.15inch/mgbanwe)(ụdị 66)
	Oke ndepụta nri gafere (ụdị)	0.036-2.019mm/mgbanwe (0.0013-0.075nch/rev)(ụdị 66)
	Ọsọ ụgbọ ibu na-eme ngwa ngwa	5m/min (16.4ft/min)
	Nha ndu ndu: Dayameta pitch	35mm / 6mm ma ọ bụ 35mm
Ibu ibu	Gafe njem slide	300mm
	Mgbakwụnye ezumike njem	130mm
	Cross-ngalaba size nke ngwá ọrụ shank	25x25mm
Ọdụdọ	Dayameta spindle	65mm
	Spindle taper	Morse Nke 5
	Njegharị Spindle	120mm
Isi moto	Isi moto ụgbọala	4.0kw ma ọ bụ 5.5kw
	Igwe mgbapụta oyi oyi	0.125kw
	moto traverse ngwa ngwa	0.12kw
Ọnụ ụgbụ / nnukwu ibu (kg)	1000mm	1640/2290
	1500mm	1850/2250
	2000mm	2090/2860
Nkwakọ ngwaahịa (LWD)	1000mm	242011501800mm
	1500mm	292011501800mm
	2000mm	346011501800mm