Mmanụ obodo nnukwu amụ ọkpọkọ eriri Lathe Machine Q1338
Atụmatụ
Nke a usoro lathe na-onwem na a taper ngwaọrụ, nke a pụrụ iji maka nhazi taper akụkụ.
Nkọwapụta
| Nkọwapụta nke YIMAKE LATHE igwe | |||
| NGWA | UNIT | Q1338 eriri eriri | |
| Isi | Oke.Dia.na-efegharị n'elu akwa | mm | Φ1000 |
| Oke.Dia.ịmafe n'elu obe slide | mm | Φ610 | |
| Anya n'etiti etiti | mm | 1500 | |
| Oke nke ike eri | mm | Φ190-380 | |
| Ogologo ụzọ akwa | mm | 755 | |
| Isi moto | kw | 22 | |
| Igwe mgbapụta oyi oyi | kw | 0.125 | |
| Spindle | Spindle gbara | mm | Φ390 |
| Ọsọ ọsọ | r/min | Nzọụkwụ 9: 6-205 | |
| Ogwe taper | Oke.nhazi taper | -- | 1:4 |
| Oke.njem nke taper ndu mmanya | mm | 1000 | |
| Ihe nbipute ngwaọrụ | Ngwa biputere njem | mm | 300 |
| Anya dị n'etiti spindle center na post ngwaọrụ | mm | 48 | |
| Ogo nke ngalaba akụrụngwa | mm | 45×45 | |
| Oke.ntụgharị akụkụ nke post ngwaọrụ | ° | ±90° | |
| Ndị na-edu ndú | Ntugharị ndu (mm) | inch | 1/2 |
| Nri | Z axis ndepụta | mm | 32 ọkwa / 0.1-1.5 |
| X axis ndepụta | mm | 32 ọkwa / 0.05-0.75 | |
| Ibu ibu | Gafe njem slide | mm | 520 |
| Ịnya ụgbọ n'ike n'ike | mm/min | 3740 | |
| Ịgba eriri | eri metric | mm | 23 ọkwa / 1-15 |
| eri inch | tpi | 22 ọkwa / 2-28 | |
| Ọdụdọ ọdụ | Dayameta ọdụ ụgbọ mmiri | mm | Φ140 |
| Tailstock quill taper | ọzọ | m6 # | |
| Tailstock quill njem | mm | 300 | |
| Ọdụdọ cross njem | mm | ± 25 | |
| Ndị ọzọ | Akụkụ (L/W/H) | mm | 5000×2100×1600 |
| Netwọk arọ (kg) | kg | 11500 | |
| Mkpokọta nha | kg | 13000 | |
| Ngwa ngwa | Ihe nbipute ngwaọrụ | 1 set | 4 ọnọdụ ntuziaka turret |
| Chuck | 2 set | Φ850 igwe eletrik na-agba anọ | |
| Ngwaọrụ taper | 1 set | taper ndu mmanya | |
| Ebe ezumike etiti | -- | kpakọrịta ma ọ dị mkpa | |
| nkwado nkwado azụ | -- | kpakọrịta ma ọ dị mkpa | |
| ngwugwu | Ngwungwu mbupụ ọkọlọtọ | 1 set | Ngwongwo ígwè na akwa mkpuchi plastik |
