VSB-60 igwe na-agwụ ike

Igwe na-agwụ ike VSB-60 egosipụtara onyonyo

Nkọwa dị mkpirikpi:

A na-ejikarị igwe a na-arụzi na imegharị oghere oghere na oghere valve n'ime igwe ọkụ dị n'ime ụgbọ ala na ọgba tum tum. O nwere isi ọrụ atọ:

1.1 Site na mandrel n'ọnọdụ kwesịrị ekwesị, onye na-akpụ akpụ nwere ike ịrụ ọrụ nrụzi na oghere nke dayameta n'ime Φ 14 ~ Φ 63.5 mm na tapered na-arụ ọrụ n'elu s valve retainer (The cutters need for forming cone angles and the special positioning mandrels, which sizes are not in the nhazi of the equipment , nwere ike inye iwu na pụrụ iche).

1.2 Igwe na-enwe ike iwepụ ma wụnye mgbanaka oche valve nke dayameta % 23.5 ~ % 76.2 mm (Ndị na-egbutu na ntinye ihe dị mkpa ka a na-enye iwu na usoro pụrụ iche).

1.3 Igwe na-enwe ike ịmegharị ma ọ bụ wepụ ntuziaka valve, ma ọ bụ dochie ya na nke ọhụrụ (Ndị na-egbutu na ntinye ngwá ọrụ dị mkpa iji iwu pụrụ iche nye iwu).

Igwe a na-adabara maka imeghari na imezi oghere ntinye na ntinye valvụ nke dayameta n'ime % 14 ~ 63.5 mm na isi cylinder nke ọtụtụ engines.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Atụmatụ

1) 3 n'akuku otu agụba cutter bee niile atọ n'akuku ozugbo na hụ na izi ezi, rụchaa oche na-enweghị egweri.Ha na-ekwe nkwa kpọmkwem oche widths si isi na isi gbakwunyere concentricity n'etiti oche na ndu.
2) Nhazi pilot a kapịrị ọnụ na mbanye bọọlụ na-ejikọta iji kwụọ ụgwọ ozugbo maka obere ndahie na nhazi ntuziaka, na-ewepụ oge ntọlite agbakwunyere site na ntuziaka gaa na ntuziaka.
3) Light arọ ike isi "ikuku-ese n'elu" na rails yiri ka okpokoro elu na pụọ na ibe na ájá.
4) Universal na-ejikwa isi nha ọ bụla.
5) Spindle tilts n'akụkụ ọ bụla ruo 12°
6) Kpọọ ngwa ngwa ọ bụla site na 20 ruo 420 rpm na-akwụsịtụghị ntụgharị.
7) Complete acc nyere igwe ma nwee ike gbanwee ya na Sunnen VGS-20

Nkọwapụta

Nlereanya	VSB-60
Akụkụ Tebụlụ Na-arụ ọrụ (L * W)	1245 * 410 mm
Akụkụ ahụ Ndozi (L * W * H)	1245 * 232 * 228 mm
Oke. Ogologo isi igwe ejigidere	1220 mm
Oke. Obosara isi Sylinder agbachiri	400 mm
Oke. Njem nke Machine Spindle	175 mm
Swing Angle nke Spindle	-12 ° ~ 12 °
Nkuku na-atụgharị nke isi ihe nrụnye cylinder	0 ~ 360°
Conical oghere na Spindle	30°
Ọsọ Spindle (Ọsọ ọsọ na-enweghị ngwụcha)	50 ~ 380 rpm
Nnukwu moto (moto ntụgharị)	Ọsọ 3000 rpm (gaa n'ihu na tụgharịa) 0,75 kW isi ugboro 50 ma ọ bụ 60 Hz
moto Sharpener	0,18 kW
Ọsọ moto Sharpener	2800 rpm
Vacuum Generator	0.6 ≤ p ≤ 0.8 Mpa
Nrụgide arụ ọrụ	0.6 ≤ p ≤ 0.8 Mpa
Ibu igwe (Net)	700 n'arọ
Ibu igwe (oke)	950 n'arọ
Akụkụ Mpụga Igwe (L * W * H)	184 * 75 * 195 cm
Akụkụ mbukota igwe (L * W * H)	184 * 75 * 195 cm